Roland V-Synth - Manual (Page 99)

99
Other Functions
Other Functions
Adjusting the Sensitivity of the
Touch Screen/Time Trip Pad/D
Beam Controller (Calibration
Mode)
Displaying the CALIBRATION MENU
Screen
1. Press [MODE].
The V-SYNTH MODE MENU window appears.
fig.MODE_50
2. Touch .
The CALIBRATION MENU screen appears.
fig.08-05_50
Adjusting the Sensitivity of the
Touch Screen
Perform this adjustment if the touch panel no longer responds as
you expect.
1. In the CALIBRATION MENU screen, touch
SCREEN>.
The T SCREEN CALIBRATION screen appears.
fig.08-06_50
2. Touch the center of “+” symbol indicated by the square
symbol in the screen, in the following order: left → top →
right
→
bottom.
When you have touched all four points, the screen will close, and
the sensitivity of the touch screen will be calibrated.