Roland V-Synth - Manual (Page 54)

54
Creating a Patch
4. In the lower part of the screen, touch .
A window like the following appears.
fig.03-34_50
5. To change the split point of each zone, refer to the
procedure described in the preceding section, “Splitting the
Keyboard to Play Different Sounds (Split).”
6. Specify the sounds (percussion instrument sounds) that
you want to play in each zone. For the procedure, refer to the
procedure described in the preceding section, “Splitting the
Keyboard to Play Different Sounds (Split).”
In this way you can create a patch that plays various percussion
instrument sounds when you press different notes of the
keyboard.
7. To save the patch you created, perform the Write operation
(p. 34).