beautypg.com

Boss flanger, Step flanger, P. 127) – Roland V-Synth User Manual

Page 127: 127 effects list, Appendices

background image

127

Effects List

Appendices

21: BOSS Flanger

This effect features a pair of the same flanger circuits used in the
BOSS compact flangers, connected in parallel for stereo input. This
adds a particular metallic-sounding modulation to the source sound.

fig.MFX-21

22: Step Flanger

This is a flanger in which the flanger pitch changes in steps. The
speed at which the pitch changes can also be specified in terms of a
note-value of a specified tempo.

fig.MFX-22

Parameter

Value

Description

Type

NORMAL, HI-
BAND

Selects the model of flanger sim-
ulated.
NORMAL: Normal type (BOSS
BF-2)
HI-BAND: High-Band type
(BOSS HF-2). Setting HI-B raise
the flanging sound one octave
above that at the NORM.

Manual

0–127

Sets the center frequency for the
effect.

Depth #1

0–127

Sets the depth of the swelling of
the flanger sound.

Rate #2

0.05–10.0 Hz,
note

Adjusts the modulation speed of
the flanger effect.

Resonance

0–127

Sets the intensity of the flanger’s
effect.

* If the Feedback Mode is

CROSS, this setting is
ignored.

Phase

0–180 deg

Specifies the spaciousness of the
flanger sound.

Feedback Mode NORMAL,

CROSS

Specifies the input destination to
which the flanger sound will be
returned.
NORMAL: The left flanger
sound will be returned to the left
input, and the right flanger
sound to the right input.
CROSS: The left flanger sound
will be returned to the right in-
put, and the right flanger sound
to the left input.

Feedback

-98– +98 %

This setting makes the flanging
sound of each of right and left
channels return to the input of
the opposite channel. Negative
(-) settings will invert the phase.

* When the Feedback Mode is set

to NORMAL, this setting will
be ignored.

Cross Mix Level -100– +100

This setting makes the flanging
sound from each of the right and
left channels mix it with the
flanging sound of the opposite
channel. Negative (-) settings
will invert the phase.

Ps Low Freq

50–4000 Hz

Frequency of the low range

Ps Low Gain

-15– +15 dB

Gain of the low range

Ps Hi Freq

2000–20000 Hz

Frequency of the high range

Ps Hi Gain

-15– +15 dB

Gain of the high range

L

R

Flanger

2-Band

EQ

Parameter

Value

Description

Pre Dly Time

0–50.0 ms

Specifies the time delay from the
original sound until the flanger
sound is heard.

Rate #1

0.05–10.0 Hz,
note

Specifies the modulation fre-
quency of the flanger sound.

Depth

0–127

Specifies the modulation depth
of the flanger sound.

Feedback

-98– +98 %

Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.

Phase

0–180 deg

Specifies the spaciousness of the
flanger sound.

Step Rate #2

0.05–10.0 Hz,
note

Specifies the frequency of pitch
change.

Flanger Level

0–127

Volume of the flanger sound

Ps Low Freq

50–4000 Hz

Frequency of the low range

Ps Low Gain

-15– +15 dB

Gain of the low range

Ps Hi Freq

2000–20000 Hz

Frequency of the high range

Ps Hi Gain

-15– +15 dB

Gain of the high range

L

R

2-Band

EQ

Step

Flanger