beautypg.com

Connecting to your computer via usb (usb mode), Switching the connected drive, Closing the usb storage screen – Roland V-Synth User Manual

Page 92: Canceling the usb connection

background image

92

Connecting to Your Computer via USB (USB Mode)

8.

Touch or to establish the connection

with your computer.

:

Mounts the internal memory as an external drive on

your computer.

:

Mounts the PC card as an external drive on your

computer.

You cannot select “PC Card” unless a PC card is inserted in the
PC CARD slot.

9.

When the USB connection is established, the driver

installation will begin. A dialog box of “Found new

hardware” will appear near the Windows task tray.

Installation is completely automatic. Please wait for it to be
completed.

10.

When installation is completed, open My Computer and you

will see a new drive icon.

In Windows Me/2000/98/98SE, a drive icon named
“Removable Disk” will appear. In Windows XP, the drive icon
will be named “V-SYNTH” if you selected “Internal.” If you
selected “PC Card,” it will show the volume label that you
assigned when formatting the card. If you formatted the card on
the V-Synth, the volume label will be “PC CARD.”

11.

Once the V-Synth is connected, you can transfer files by

operating your computer.

Do not perform the following actions while “Access” (the access
indicator) in the USB Storage screen is blinking. Doing so may
cause your computer to freeze, and may also damage the files in
the drive.

• Do not disconnect the USB cable

• Do not remove the PC card while it is being accessed

• Do not suspend (standby), hibernate, restart, or shut down

your computer

• Do not turn off the power of V-Synth.

Switching the Connected Drive

When USB-connected, here’s how to switch between “Internal” (the
V-Synth’s internal memory) and “PC Card” (the PC card inserted in
the V-Synth).

1.

In the V-Synth’s USB Storage screen, make sure that

“Access” (the access indicator) is not blinking.

2.

In My Computer, right-click the “Removable Disk” icon and

execute “Eject.”

3.

In the V-Synth’s USB Storage screen, touch or

to change drives.

Closing the USB Storage Screen

1.

In the V-Synth’s USB Storage screen, make sure that

“Access” (the access indicator) is not blinking.

2.

In My Computer, right-click the “Removable Disk” icon and

execute “Eject.”

3.

Press [EXIT].

The USB Storage screen will close.

If you press [EXIT] without performing the “Eject” operation on
your computer, a WARNING window like the following will
appear.

fig.07-04_50

Touch to close this window only if you are unable to
perform the “Eject” operation on your computer.

Canceling the USB Connection

Once you have connected the V-Synth and your computer in Storage
mode, you must cancel the USB connection on your computer before
you do either of the following actions:

• Disconnect the USB cable

• Turn off the V-Synth’s power while the USB cable is connected

1.

Use “Eject hardware” (displayed in the task bar in the lower

right of the screen) to cancel the connection with the V-

Synth.

The “Removable Disk” drive icon will disappear from My
Computer, and the USB connection will be cancelled.