Ricoh RDC-7 - Manual (Page 95)

93
Erasing
4
r
Press the or button to select the
file to be erased and press the shutter
release button.
The selected file will be erased. To erase
more files, repeat step
r
.
t
Press the CANCEL button.
The display will return to the erase menu.
Note
• When a file is erased, the subsequent file numbers are reassigned.
• Protected files, which are identified by the
mark, cannot be erased
until they are unprotected. See “Protecting a File”
→
(p.85).
Erase All Images
All recorded files in the folder are erased.
q
Set the mode dial to [ ] and press
the button to select the erase
source.
w
Press the button.
e
Press the or button to select
[ERASE ALL IMAGES] and press the
ENTER button.
r
Press the shutter release button.
All the files will be erased and the display will
return to the erase menu.
Note
• Protected files, which are identified by the mark, cannot be erased
until they are unprotected. See “Protecting a File” (p.85).
ERASE
ERASE SINGLE IMAGE
ERASE ALL IMAGES
ERASE SELECTED IMAGES
SELECT:
BACK:CANCEL SEL.:ENTER
ERASE ALL?
START:RELEASE
CANCEL:CANCEL
ERASE
ERASE
BACK:CANCEL START:RELEASE BACK:CANCEL START:RELEASE
18/28