Ricoh RDC-7 - Manual (Page 71)

69
Shooting
2
2/3
SOFT MODE OFF
INTERVAL MODE
AUTO BRACKET OFF
BACK:MENU
SELECT: CHANGE:
SEL.:ENTER
MONOCHROME MODE OFF
DATE IMPRINT OFF
SHOOTING MODE
28
AB
0.0 + 0.5 –0.5
w
Press the or button to select
[AUTO BRACKET].
e
Press the or button to select
[ON] and press the ENTER button.
r
Press the MENU button.
AB will be displayed on the LCD monitor.
t
Press the shutter release button to
take the pictures.
When you press the shutter release button, 3
frames are shot in succession at –0.5 EV, 0.0
and +0.5 EV, based on the preset exposure
compensation value.
Note • You cannot use the auto bracket function when the image quality
mode is set on non-compressed (NC) or PRO (PRO, PRO-L, PRO-H),
or when [IMAGE WITH SOUND] is set on [ON].
• The flash does not fire in auto bracket mode.
Switching to Non-Compressed Mode
In normal image quality mode, the data is compressed at the time of recording.
To record without compressing the data, set [NO-COMPRESSION] to [ON] to
switch the image quality mode.
q
Set the mode dial to [ ] and press
the MENU button.