Ricoh RDC-7 - Manual (Page 94)

92
Erasing Files
This section explains how to erase recorded files. There are three ways to
erase files:
1) ERASE SINGLE IMAGE for erasing one selected file at a time.
2) ERASE ALL IMAGES for erasing all files at once.
3) ERASE SELECTED IMAGES for erasing multiple selected files.
Important
Note • Files cannot be restored once they are erased. Before starting to erase
a file, make sure that you want to erase it.
Note
• Files on a write-protected SmartMedia memory card cannot be erased
unless the write protect pad is removed from the card. See “Protecting
Against Accidental Writing”
→
(p.27).
• Only files that have been taken with this camera can be erased.
• Erasing time may vary depending on the capacity of the SmartMedia
memory card and the type of file.
Erase Single Image
The selected file is erased.
q
Set the mode dial to [ ] and press
the button to select the erase
source.
w
Press the button.
e
Press the or button to select
[ERASE SINGLE IMAGE] and press
the ENTER button.
ERASE
ERASE SINGLE IMAGE
ERASE ALL IMAGES
ERASE SELECTED IMAGES
SELECT:
BACK:CANCEL SEL.:ENTER