Ricoh RDC-7 - Manual (Page 12)

10
LCD Panel
■ Information Displays
Recording Mode Displays Play/Erase Mode Displays
q Recording Destination/Playback Source: •
→
(p.42, 76)
w Recording Data Indicator (for recording): Displays the remaining number of pictures
and remaining recording time
e Self-Timer:
→
(p.59)
r Flash Mode: AUTO: No display • • • (blinking)
→
(p.53)
t Red-eye Reduction Mode:
→
(p.63)
y Sound Recording Indicator:
→
(p.50, 52, 77)
u Battery Symbol:
→
(p.8)
i Image Quality (Compression Rate): • • • •
→
(p.43)
o Size (No. of Pixels): • •
→
(p.43)
!0 Recording Data Indicator (for playback): Displays the number of the image file being
played and playback time
Note
• Recording Destination/Playback Source • is displayed for files
recorded with another digital camera from the Ricoh DC-3Z/DC-4 or
RDC-5000 series or a non-Ricoh camera.
■ Error Messages
If any of the error messages listed below appear on the camera’s LCD monitor,
read the corresponding explanation and take the corrective action suggested.
Note
• If the error display does not clear, reset the LCD monitor to its factory
default settings.
How to reset: With the terminal cover open, press the reset button
(p.5). If the error display still does not clear, call your dealer or a Ricoh
service center.
q w
e
r
t
y
i
o
u
!0
Error
Message
Explanation and Remedy
Reference
Page
The SmartMedia memory card is
unformatted. Format the card with the
camera before using it.
Format the internal memory before using it.
A SmartMedia memory card of this type is
not supported by this camera. Use a
different type of SmartMedia memory card.
P. 98
P.98
–