Ricoh RDC-7 - Manual (Page 34)

32
FORMAT
SET 1/3
SERIAL TRANSFER
LCD CONFIRMATION 1SEC.
AUTO POWER OFF 1MIN
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
BEEP SOUND ON
SET 2/3
POWER SAVE MODE OFF
DATE SETTING 2000/ 6/15
VIDEO OUT MODE NTSC
SELECT: CHANGE:
SEL.:ENTER
SEQUENTIAL NO. OFF
LANGUAGE ENGLISH
SET 3/3
INITIALIZE SETTING
SELECT: CHANGE:
SEL.:ENTER
■ Selecting, Setting and Cancelling Items
• ENTER button : Enters the setting. Enters the selected setting at the
position indicated by the arrow ( ) and proceeds to
the next display.
• CANCEL button : Cancels the setting and returns to the previous display.
• or button : Changes the setting.
• or button : Selects the setting you want to change.
■ Menu Settings
● SET Menu
FORMAT : Formats the internal memory or
SmartMedia memory card.
→
(p.98)
SERIAL TRANSFER : Used to transfer recorded files to a
personal computer.
KEEP SETTINGS : Saves the camera settings.
→
(p.99)
LCD CONFIRMATION : Sets the confirmation time for images
after shooting.
→
(p.100)
AUTO POWER OFF : Enables or disables the automatic
power off feature.
→
(p.100)
BEEP SOUND : Switches the beep sound on and off.
→
(p.101)
POWER SAVE MODE : Decreases the brightness of the LCD
monitor to conserve battery power.
→
(p.101)
SEQUENTIAL NO. : Switches consecutive numbering of
files on and off.
→
(p.102)
DATE SETTING : Sets the date and time.
→
(p.34)
VIDEO OUT MODE : Switches between NTSC and PAL
when the camera is connected to a TV
set.
→
(p.103)
LANGUAGE : Selects the language of the LCD
monitor display.
→
(p.103)
INITIALIZE SETTING : Returns all the settings to their initial
status.
→
(p.104)
Note • [SERIAL TRANSFER] is used to transfer recorded files to a personal
computer by serial connection.