Ricoh RDC-7 - Manual (Page 100)

98
Changing Camera Settings
This section explains how to format (initialize) a SmartMedia memory card or
the internal memory, and how to change the various settings such as auto
power off, beep sound and keep settings.
Formatting a Card/Internal Memory
Follow the procedure below to format a SmartMedia memory card or the
internal memory.
Before using a new SmartMedia memory card or a SmartMedia memory card
that has been used on another device (such as a PC), you need to format it
with the camera.
q
Set the mode dial to [ ].
w
Press the or button to select
[FORMAT] and press the ENTER
button.
e
Press the or button to select
SmartMedia memory card or internal
memory and press the ENTER button.
r
Press the shutter release button.
The “FORMATTING” message will be
displayed. When formatting is completed, the
display will return to the SET menu.
Note
• A SmartMedia memory card with a write protect pad attached to it
cannot be formatted. Remove the pad to format the SmartMedia
memory card.
FORMAT
SET 1/3
SERIAL TRANSFER
LCD CONFIRMATION 1SEC.
AUTO POWER OFF 1MIN
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
FORMAT
FORMAT MEMORY CARD
BACK:CANCEL SEL.:ENTER
FORMAT INTERNAL MEMORY
FORMAT INTERNAL MEMORY
START:RELEASE
CANCEL:CANCEL
FORMAT