Setting the size of the subject (zoom), Digital zoom function – Ricoh RDC-7 User Manual

Page 46

1.3

WIDE

TELE

Magnification

Setting the Size of the Subject (Zoom)

By moving the zoom lever, you can vary the size of the subject without
changing the distance between yourself and the subject (zoom range is
equivalent to 35 - 105mm in 35mm camera format).

Move the zoom lever to

Move to

to increase the size of the

subject (TELE), and move to

to decrease

the size of the subject (WIDE).

The zoom indication bar will be displayed on

the LCD monitor.
Adjust the subject to the desired size.

■

Digital Zoom Function

If you keep moving the zoom lever to

for

more than 2 seconds when the camera is set
on

(still picture mode) and the Image

quality mode is

and the lens is at the

maximum telephoto position or the camera is
in macro mode (

is displayed), the digital

zoom function is triggered to magnify your

shot 1.3 times, 1.6 times or 3.2 times.
To disable the digital zoom function, move
the zoom lever to

Note

• The digital zoom function can be used when the Image quality mode is

. It cannot be used in the following situations: when the shooting

mode is set on

(sound),

(text),

(continuous shooting) or

(motion picture)

when the image quality mode is set on non-compressed (NC) or PRO
(PRO • PRO-L • PRO-H)
when LCD monitor is closed

• Decide the composition using the LCD monitor and take the picture.

WIDE

TELE