Ricoh RDC-7 - Manual (Page 102)

100
Changing LCD Confirmation Time
When you press the shutter button to take a picture in (still picture) mode,
the shot image appears on the LCD monitor. You can select the time for
confirming the image after shooting from 0 sec., 1 sec., 2 sec., 3 sec., 4 sec.
and 5 sec.
q
Set the mode dial to [ ].
w
Press the or button to select
[LCD CONFIRMATION].
e
Press the or button to select the
image confirmation time (0 SEC., 1
SEC., 2 SEC., 3 SEC., 4 SEC., 5 SEC.)
and press the ENTER button.
Note
• If you select 0 sec. for the image confirmation time, the shot image will
not be displayed on the LCD monitor.
• The shot image will be displayed until recording is completed,
regardless of the preset image confirmation time, when in (still
picture) mode with sound, non-compressed (NC) or PRO (PRO, PRO-
L, PRO-H) mode, or
(text) mode.
Auto Power Off Setting
The camera will turn off automatically (auto power off) in recording and play
modes to conserve the battery if it is left idle (no buttons or switches operated)
for the preset time. You can select from 1 min., 3 min., 5 min., and OFF for the
time until the auto power off function is activated.
q
Set the mode dial to [ ].
w
Press the or button to select
[AUTO POWER OFF].
e
Press the or button to select the
preset time (1 MIN, 3 MIN, 5 MIN, OFF)
and press the ENTER button.
If you select OFF, the auto power off function
will be disabled.
FORMAT
SET 1/3
SERIAL TRANSFER
LCD CONFIRMATION 1SEC.
AUTO POWER OFF 1MIN
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
FORMAT
SET 1/3
SERIAL TRANSFER
LCD CONFIRMATION 1SEC.
AUTO POWER OFF 1MIN
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS