Ricoh RDC-7 - Manual (Page 57)

55
Shooting
2
IMAGE WITH SOUND OFF
SHOOTING MODE 1/3
FOCUS AF
REDEYE REDUCTION OFF
ISO SENSITIVITY AUTO
BACK:MENU
SELECT: CHANGE:
SEL.:ENTER
FLASH STRENGTH NORMAL
28
■ Adjusting the Strength of the Flash
When shooting with the flash activated ( , lit, blinking), you can adjust the
strength of the flash.
q
Set the mode dial to [ ] or [ ] and
press the MENU button.
w
Press the or button to select
[FLASH STRENGTH].
e
Press the or button to select the
desired strength (NORMAL, STRG or
SOFT) and press the ENTER button.
r
Press the MENU button.
If you select STRONG, + is displayed on the
LCD monitor, and if you select SOFT, – is
displayed. There is no display when you
select NORMAL.
t
Press the shutter release button to
shoot the image.
Note
• Enable the keep settings mode to save the flash brightness setting.
See “Keep Settings”
→
(p.99).