Roland XV-3080 - Manual (Page 70)

70
Chapter 2 Using the XV-3080 Effects
Balance #
Adjust the volume balance between the original sound and
the flanger sound.
With a setting of D100:0W only the direct sound will be
output, and with a setting of D0:100W only the flanger sound
will be output.
Level (Output Level)
Adjust the output level.
62:TREMOLO
Tremolo cyclically modulates the volume to add tremolo
effect to the sound.
fig.2-72
Mod Wave (Modulation Wave)
TRI: The sound will be modulated like a triangle wave.
SQR: The sound will be modulated like a square wave.
SIN: The sound will be modulated like a sine wave.
SAW1/2: The sound will be modulated like a sawtooth wave.
The teeth in Saw1 and Saw2 point at opposite directions.
fig.2-72a
Rate #
Adjust the frequency (speed) of the change.
Depth #
Sets the depth to which the effect is applied.
LowGain
Adjust the low frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the low
frequency range.
Hi Gain
Adjust the high frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the high
frequency range.
Level (Output Level)
Adjust the output level.
63:AUTO PAN
The Auto Pan effect cyclically modulates the stereo location
of the sound.
fig.2-73
Mod Wave (Modulation Wave)
TRI: The sound will be modulated like a triangle wave.
SQR: The sound will be modulated like a square wave.
SIN: The sound will be modulated like a sine wave.
SAW1/2: The sound will be modulated like a sawtooth wave.
The teeth in Saw1 and Saw2 point at opposite directions.
fig.2-73a
Rate #
Adjust the frequency (speed) of the change.
Depth #
Sets the depth to which the effect is applied.
LowGain
Adjust the low frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the low
frequency range.
Hi Gain
Adjust the high frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the high
frequency range.
Level (Output Level)
Adjust the output level.
L in
R in
L out
R out
Tremolo
2-Band EQ
2-Band EQ
Tremolo
Saw1 Saw2
L in
R in
L out
R out
Auto Pan
2-Band EQ
2-Band EQ
Auto Pan
Saw1 Saw2