Roland XV-3080 - Manual (Page 35)

35
Chapter 2 Using the XV-3080 Effects
Chapter 2
HF Damp Frequency *3
This specifies the frequency above which the high-frequency
content of the reverb sound will be reduced, or “damped.”
HF Damp Gain -36–0 dB
This adjusts the amount of damping applied to the frequency
range selected with HF Damp. With a setting of “0,” there
will be no reduction of the reverb’s high-frequency content.
*1 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600,
2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12500 Hz,
BYPASS
*2 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800,
1000, 1250, 1600, 2000, 2500, 3200, 4000 Hz
*3 4000, 5000, 6400, 8000, 10000, 12500 Hz
RHYTHM REV OUT (Rhythm Reverb
Output)
Output Assign (Reverb Output Assign) A/B/C
This setting allows you to specify the pair of OUTPUT jacks
to which the stereo output of the Reverb is routed.
Level (Reverb Level) 0–127
This specifies the output level of the Reverb.
Settings in General MIDI
Mode ([GM]-[EFFECTS])
For details refer to “Making Effects Settings(EFFECTS) p.
143.”