Roland XV-3080 - Manual (Page 152)

152
Parameter List
CONTROL Group(p. 98)
Display Parameter Value
PATCH KEY MODE Assign Key assign mode POLY, MONO
Legato Legato switch OFF, ON
Legato Retrigger Legato retrigger switch OFF, ON
PATCH PORTAMENTO Sw Portament switch OFF, ON
Time Portament time 0–127
Mode Portament mode NORMAL, LEGATO
Type Portament type RATE, TIME
Start Portament start pitch PITCH, NOTE
CTRL Rx MIDI Bender Recieve pitch bend switch OFF, ON T
Expression Recieve expression switch OFF, ON T
Pan Mode Recieve pan mode switch CONTINUOUS, KEY-ON T
Hold-1 Recieve hold-1 switch OFF, ON T
Redamper Recieve redamper switch OFF, ON T
Envelope Mode Envelope mode NO SUSTAIN, SUSTAIN T
TMT CTRL &BENDER TMT Ctrl Sw TMT control switch OFF, ON
Bend Range Bend range down -48–0 semitone
Bend range up 0–+12 semitone
MATRIX CTRL SRC Control 1 Control source1 (*1)
Control 2 Control source2 (*1)
Control 3 Control source3 (*1)
Control 4 Control source4 (*1)
MATRIX CONTROL 1 Destination Control1 Destination1–4 (*2)
Sns Control1 sens1–4 -63–+63
Tone Tone select1–4 OFF, ON, R T
MATRIX CONTROL 2 Destination Control2 Destination1–4 (*2)
Sns Control2 sens1–4 -63–+63
Tone Tone select1–4 OFF, ON, R T
MATRIX CONTROL 3 Destination Control3 Destination1–4 (*2)
Sns Control3 sens1–4 -63–+63
Tone Tone select1–4 OFF, ON, R T
MATRIX CONTROL 4 Destination Control4 Destination1–4 (*2)
Sns Control4 sens1–4 -63–+63
Tone Tone select1–4 OFF, ON, R T
1:OFF, CC01–95(except 32), BENDER, AFTERTOUCH, SYS-CTRL1, SYS-CTRL2, SYS-CTRL3,SYS-CTRL4, VELOCITY, KEYFOLLOW, TEMPO, LFO1, LFO2,
PITCH-ENV, TVF-ENV, TVA-ENV
2:OFF, PITCH, CUTOFF, RESONANCE, LEVEL, PAN, DRY LEVEL, CHORUS SEND, REVERB SEND, LFO1 PCH DEPTH, LFO2 PCH DEPTH, LFO1 TVF
DEPTH, LFO2 TVF DEPTH, LFO1 TVA DEPTH, LFO2 TVA DEPTH, LFO1 PAN DEPTH, LFO2 PAN DEPTH, LFO1 RATE, LFO2 RATE, PIT ENV A-TIME, PIT
ENV D-TIME, PIT ENV R-TIME, TVF ENV A-TIME, TVF ENV D-TIME, TVF ENV R-TIME, TVA ENV A-TIME, TVA ENV D-TIME, TVA ENV R-TIME, TMT, FXM
DEPTH, MFX CTRL1, MFX CTRL2, MFX CTRL3, MFX CTRL4
WAVE Group(p. 91)
Display Parameter Value
WAVE Group Wave group INT, XP-A, XP-B, XP-C, XP-D, XP-E, XP-F T
Number Wave number(L, R) 0001–1083 T
Gain Wave gain -6, 0, +6, +12 dB T
Switch Tone switch OFF, ON T
Wave Tempo Sync Wave tempo sync OFF, ON T
FXM Switch Frequency cross modulation switch OFF, ON T
Color Frequency cross modulation color 1–4 T
Depth Frequency cross modulation depth 1–17 T
TONE DELAY Mode Tone delay mode (*1) T
Time Tone delay time 0–127(*2) T
1:NORMAL, HOLD, KEY-OFF-NORMAL, KEY-OFF-DECAY
2:It can also be set in terms of notes.
(Double note) (Dotted whole note), (Dotted half note),
(Dotted thirty-second note),
(Whole note), (Double-note triplet),
(Sixteenth-note triplet), (Thirty-second note), (Sixty-fourth-note triplet), (Sixty-fourth note), (Thirty-second-note triplet),
(Dotted eighth note), (Quarter-note triplet), (Eighth note), (Half-note triplet), (Quarter note),
(Dotted quarter note), (Whole-note triplet), (Half note),
(Sixteenth note), (Eighth-note triplet), (Dotted sixteenth note),