Roland XV-3080 - Manual (Page 17)

17
Chapter 1 Selecting and Playing a Sound
Chapter 1
The following categories can be selected.
Category
Group Category Contents
— NO ASSIGN No assign
Piano
PNO AC.PIANO Acoustic Piano
EP EL.PIANO Electric Piano
Keys&Organ
KEY KEYBOARDS Other Keyboards
(Clav, Harpsichord etc.)
BEL BELL Bell, Bell Pad
MLT MALLET Mallet
ORG ORGAN Electric and Church
Organ
ACD ACCORDION Accordion
HRM HARMONICA Harmonica, Blues Harp
Guitar
AGT AC.GUITAR Acoustic Guitar
EGT EL.GUITAR Electric Guitar
DGT DIST.GUITAR Distortion Guitar
Bass
BS BASS Acoustic & Electric
Bass
SBS SYNTH BASS Synth Bass
Orchestral
STR STRINGS Strings
ORC ORCHESTRA Orchestra Ensemble
HIT HIT&STAB Orchestra Hit, Hit
WND WIND Winds
(Oboe, Clarinet etc.)
FLT FLUTE Flute, Piccolo
Brass
BRS AC.BRASS Acoustic Brass
SBR SYNTH BRASS Synth Brass
SAX SAX Sax
Synth
HLD HARD LEAD Hard Synth Lead
SLD SOFT LEAD Soft Synth Lead
TEK TECHNO SYNTH Techno Synth
PLS PULSATING Pulsating Synth
FX SYNTH FX Synth FX (Noise etc.)
SYN OTHER SYNTH Poly Synth
Pad
BPD BRIGHT PAD Bright Pad Synth
SPD SOFT PAD Soft Pad Synth
VOX VOX Vox, Choir
Ethnic
PLK PLUCKED Plucked (Harp etc.)
ETH ETHNIC Other Ethnic
FRT FRETTED Fretted Inst
(Mandolin etc.)
Rhythm&SFX
PRC PERCUSSION Percussion
SFX SOUND FX Sound FX
BTS BEAT&GROOVE Beat and Groove
DRM DRUMS Drum Set
CMB COMBINATION Other Patches which
use Split and Layer
Selecting Patches and Rhythm
Sets from an External MIDI
Device
You can select XV-3080 Patches and Rhythm Sets – including
those used by Parts in a Performance – from an external
MIDI device.
In Patch or Rhythm Set modes
1. Press [PATCH] – or [RHYTHM] if you wish to select a
Rhythm Set – to make the button’s indicator light.
2. Set the transmission channel of your external MIDI
device to match Patch/Rhy Rx Ch, the XV-3080’s MIDI
reception channel.
To learn about the MIDI settings of your external MIDI
device, see its owner’s manual.
3. Transmit a Bank Select MSB (Controller #0) message to
the XV-3080 with a value corresponding to the group in
which the desired Patch – or Rhythm Set – is stored.
If the value is “87,” a Patch is selected. If the value is “86,” a
Rhythm Set is selected.
4. Transmit a Bank Select LSB (Controller #32) message to
the XV-3080 with a value corresponding to the bank in
which the desired Patch – or Rhythm Set – is stored.
5. Transmit the Program Change value corresponding to
the Patch or Rhythm Set.
The desired Patch or Rhythm Set will be selected on the XV-
3080.
* When the XV-3080 receives only Program Change messages
without receiving Bank Select messages, it will switch to the
corresponding Patch or Rhythm Set from the currently
selected group or bank.