Roland XV-3080 - Manual (Page 122)

122
Chapter 7 Saving a Sound You Create
Saving Edits to the XV-
3080’s Internal Memory
If you turn the power off or select another Patch,
Performance, or Rhythm Set after you have modified a Patch,
Performance or Rhythm Set, the changes you have made will
be lost. If you wish to preserve the data, store it into the XV-
3080’s USER memory.
* Patch, Performance, and Rhythm Set settings cannot be saved
directly to memory cards. To save on a memory card, refer to
“Transmitting to a Memory Card” (p. 125).
Saving Patches (PATCH WRITE)
1. Make sure that the Patch you wish to save is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [ ] or [ ] to select the UTIL 1 page.
4. Use [ ] or [ ] to make “WRITE” blink, and then
press [ENTER].
5. Turn the VALUE dial or press [INC]/[DEC] to select the
number of the memory location in which you wish to
save the Patch (USER area).
6. Press [ENTER] to save the Patch and return to the
PATCH PLAY page.
To cancel the procedure, press [EXIT].
* By holding down [SHIFT] and pressing [UTILITY], you can
move directly to the PATCH WRITE page.
Saving a Performance
1. Make sure that Performance you wish to save is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [ ] or [ ] to select the UTIL 1 page.
4. Use [ ] or [ ] to make “WRITE” blink, and then
press [ENTER].
5. Turn the VALUE dial or press [INC]/[DEC] to select the
number of the memory location in which you wish to
save the Performance (USER area).
6. Press [ENTER] to save the Performance and return to the
PERFORM PLAY page.
To cancel the procedure, press [EXIT].
* By holding down [SHIFT] and pressing [UTILITY], you can
move directly to the PERFORM WRITE page.
Saving a Rhythm Set
1. Make sure that the Rhythm Set you wish to save is
selected.
2. Press [UTILITY] to make its indicator light.
3. Press [ ] or [ ] to select the UTIL 1 page.
4. Use [ ] or [ ] to make “WRITE” blink, and then
press [ENTER].
Internal Write Protect
The Internal Write Protect setting is provided to help
prevent the accidental overwriting of data in the USER
memory. When saving new data to the USER memory,
you must turn off Internal Write Protect. If you attempt
to write data when it is on, the following display will
appear.
fig.7-03
Change the displayed ON to OFF and press [ENTER] to
turn Internal Write Protect off. Press [ENTER] once
again, and the data will be written into the USER
memory.
Once you disable Internal Write Protect, it will remain
disabled until the XV-3080’s power is turned off.
Compare Function (PATCH)
The Compare function allows you to play the Patch
currently occupying the writing destination, so that you
can check whether you really want to overwrite it. To
play the Patch of the writing destination, press [UNDO]
to access the PATCH COMPARE page. You can select
the writing destination Patch in this display as well.
After selecting the Patch, return to the previous page by
pressing [UNDO] or [EXIT].
fig.7-04.e
* Please be aware that when the Compare function plays a
Patch, the Patch may sound slightly different than when
it is played normally.
Writing destination Patch (group, number, name)