Roland XV-3080 - Manual (Page 20)

20
Chapter 1 Selecting and Playing a Sound
Setting a Patch’s Pitch in
Octave Steps (Octave Shift)
In Patch mode, you can easily change the pitch of an entire
Patch.
Each time you press [ ]/[ ], the pitch will change in one-
octave steps. You can adjust a Patch’s pitch by as much as +/
- 3 octaves.
fig.1-10.e
Selecting How a Patch Will
Play (Polyphonic/
Monophonic)
You can set whether a Patch will play multiple notes at the
same time (Polyphonic) – for example, when you play a
chord or legato line – or whether only the last-played note
will be heard (Monophonic).
1. Select the Patch you wish to set up. (p. 16)
2. Press the [CONTROL] function select button.
3. Use [ ]/[ ] to select the PATCH KEY MODE page.
fig.1-11.e
4. Press [ ]/[ ] to move the cursor beneath
“Assign.”
5. Press [INC] to select “POLY” (Polyphonic) or [DEC] to
select “MONO” (Monophonic).
6. Press [EXIT].