Roland XV-3080 User Manual

Page 11

Front and Rear Panels

[

], [

]

Move the cursor (underline) with these.

[

], [

]

When the left edge of the display shows a

symbol,

use these buttons to move to other parameter screens.

Hold [EXIT] and press [

] to hear the demo songs.

G (MODE)

[PERFORM]

Press this button to enter Performance mode. (p. 14)

Press this button while holding down [SHIFT] to switch to
Part Play mode, enabling you to make changes to the settings
for the Patch and Rhythm Set assigned to each Part (p. 109).

[PATCH]

Press this to enter Patch mode. (p. 14)

[RHYTHM]

Press this to enter Rhythm Set mode. (p. 14)

[GM]

Press this to enter General MIDI 2 mode. (p. 14)

H (SOUND LIBRARY)

[USER]

This selects a sound from the USER library. (p. 15)

[CARD]

This selects a sound from an installed memory card, sold
separately. (p. 15)

[PRESET]

This selects a sound from the PRESET library. (p. 15)

[EXP]

This selects a sound from a wave expansion board, sold
separately. (p. 15, Quick Start p. 2)

PART SELECT [1/9]–[8/16]

This selects a Part whose settings you wish to change. (p.
103)

This switches each Part on or off. (p. 102)

TONE SWITCH [1]–[4]

This switches each Tone on or off. (p. 84)

TONE SELECT [1]–[4]

This selects a Tone whose settings you wish to change. (p. 89)

[A]–[H]

This selects a sound from the SOUND LIBRARY. (p. 15)

[SHIFT]

Use [SHIFT] in combination with other buttons. Holding
down this button changes the functions of other buttons.

[ENTER]

Use this button to finalize a setting value or to execute an
operation.

[UNDO]

Use this to restore a modified parameter value to its original
setting.

[EFFECTS ON/OFF]

Use this to turn the internal effects (Multi-Effects, Chorus,
Reverb) on or off. (p. 21)

MEMORY CARD

A commercially available SmartMedia memory card can be
inserted here. (p. 125)

[MIDI MESSAGE/RX]

MIDI MESSAGE:

This will light when a MIDI message is

received.

RX:

This turns Parts on and off in Performance mode and

GM mode. (p. ??)

[1-8/9-16]

This specifies whether the PART SELECT [1/9]–[8/16]
buttons will select Parts 1–8 or Parts 9–16.

When this button is lit, Parts 9–16 can be selected.

Power Switch

This turns the XV-3080's power on and off. (Quick Start p. 11)