beautypg.com

Roland XV-3080 User Manual

Page 33

background image

33

Chapter 2 Using the XV-3080 Effects

Chapter 2

Cutoff Freq (Cutoff Frequency) *1

This sets the cutoff frequency at which the LPF or HPF begin
to work.

* 1 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,

2500, 3150, 4000, 5000, 6300, 8000 Hz

For Delay

Delay C (Delay Center) 200–1000 ms

This sets the delay time for the delay located at the center of
the stereo field.

Delay L (Delay Left) 200–1000 ms

This sets the delay time for the delay located at the left side of
the stereo field.

Delay R (Delay Right) 200–1000 ms

This sets the delay time for the delay located at the right side
of the stereo field.

Fbk (Feedback) -98– +98%

This adjusts the amount of delay feedback, controlling the
number of times the delay repeats. Higher values result in
more repeats. With negative (-) values, the phase of the
repeated delays is inverted.

Level C (Delay Center Level) 0–127

This sets the volume level of the delay located at the center of
the stereo field.

Level L (Delay Left Level) 0–127

This sets the volume level of the delay located at the left side
of the stereo field.

Level R (Delay Right Level) 0–127

This sets the volume level of the delay located at the right
side of the stereo field.

HF Damp *1

This allows you to reduce, or “damp,” the high-frequency
content of the repeated feedback delays – frequencies above
the selected value will be damped. If you do not wish to
damp the high-frequency content of the feedback delays, set
this parameter to BYPASS.

* 1 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,

2500, 3150, 4000, 5000, 6300, 8000 Hz, BYPASS

RHYTHM CHO OUT (Rhythm Chorus
Output)

Output Assign (Chorus Output Assign) A/B/C

This setting selects the pair of OUTPUT jacks to which the

Chorus unit’s stereo output is routed when Chorus Output
Select is set to “MAIN” or “MAIN+R.”

Level (Chorus Level) 0–127

This setting determines the Chorus output level.

Select (Chorus Output Select)

This parameter allows you to send the Chorus output
directly to the currently selected OUTPUT jacks, to the
Reverb, or to both.

MAIN:

The Chorus output is sent only to the OUTPUT jacks.

fig.2-03x.e

REV:

The Chorus output is sent only to the Reverb.

fig.2-03y.e

MAIN+R:

The Chorus output is sent to the OUTPUT jacks

and to the Reverb.

fig.2-03z.e

OUTPUT

OUTPUT

Chorus Input

Chorus

Reverb

OUTPUT

OUTPUT

Chorus Input

Reverb Input

Chorus

Reverb