Renesas Emulation Pod M306H7T3-RPD-E - Manual (Page 48)

M306H7T3-RPD-E User’s Manual 2. Setup
REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 46 of 88
2.9.6 Bypass Capacitors for A/D Converter
The M306H7T3-RPD-E has the M306H7T3-PRT board which has a foot pattern for installing bypass capacitors for A/D
converter near the MCU and premounted 0.1μF capacitors. Mount suitable bypass capacitors as occasion demands. Figure 2.15
shows where they are installed and Figure 2.22 shows their connection.
Figure 2.22 Foot patterns of bypass capacitors for A/D converter
IMPORTANT
Note on the A/D Converter Function:
Because a flexible cable and other devices are used between the evaluation MCU and the user system,
the A/D converter operates differently from that of the actual MCU. Make the final evaluation of the
A/D converter with the actual MCU.
IC8
M306H7FG-TOOL
C7
AVSS
AVCC