Renesas Emulation Pod M306H7T3-RPD-E - Manual (Page 38)

M306H7T3-RPD-E User’s Manual 2. Setup
REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 36 of 88
2.9 Changing Settings
This chapter describes how to set the inside of the emulator.
2.9.1 Removing/Attaching the Upper Cover
(1) Removing the upper cover
To open the upper cover, remove the four screws of both sides of this product and lift off the upper cover (see Figure 2.14)
(2) Attaching he upper cover
To close the upper cover, attach the upper cover and secure the four screws of both sides of this product.
Figure 2.14 Removing the upper cover
CAUTION
Note on Removing and Attaching the Upper Cover:
Always shut OFF power when removing/attaching the upper cover or changing the switch settings.
Otherwise the internal circuit may be damaged.