2 connecting the flx120-rpd to the emulation pod, Caution, Important – Renesas Emulation Pod M306H7T3-RPD-E User Manual

Page 26

M306H7T3-RPD-E User’s Manual

2. Setup

REJ10J0964-0100 Rev.1.00 August 01, 2005

Page 24 of 88

2.4.2 Connecting the FLX120-RPD to the Emulation Pod
Figure 2.3 shows how to connect the FLX120-RPD and the emulation pod.

Figure 2.3 Connecting the FLX120-RPD to the emulation pod

CAUTION

Note on Connecting the Cable:

Always shut OFF power before connecting the emulation pod and the FLX120-RPD. Otherwise, the
internal circuits may be damaged.

IMPORTANT

Note on Securing the Screws:

After connecting the emulation pod and the FLX120-RPD, be sure to secure the screws mounted in both
sides of the connector cover

FLX120-RPD (Secure with the screws)

Emulation pod