Nortel Networks 2500 Series - Manual (Page 75)

Check a configuration 75
Command Purpose
ssl certificate Create a certificate on the next startup.
For switches that include a secure Web server
(for example, ERS 5510) Nortel recommends
that the generic certificate be replaced with
a new certificate generated by the
ssl
certificate command.
ssl Enable SSL server.
show ssl Display SSL settings.
Configure access control
Perform these commands to configure access control .
Command Purpose
ipmgr source-ip 1 mask Enable management from the trusted net.
ipmgr source-ip 2 mask Enable management from trusted net 2.
show ipmgr Display access control configuration.
Check a configuration
If you want to modify the current configuration, you can check it from the
Privileged Executive mode.
To display the switch configuration, enter show running-config .
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.