Nortel Networks 2500 Series - Manual (Page 56)

56 Configuration files fundamentals
Saving current configuration
Procedure Steps
Step Action
1 At the command prompt, enter enable to enter the Privileged
Executive NNCLI mode.
2 At the Privileged Executive prompt, enter copy running-confi
g tftp address filename .
--End--
Saving current configuration to flash memory
Procedure Steps
Step Action
1 At the command prompt, enter enable to enter the Privileged
Executive NNCLI mode.
2 At the Privileged Executive prompt, enter copy config nvram .
--End--
Restoring system configuration from TFTP
Procedure Steps
Step Action
1 At the command prompt, enter enable to access the Privileged
Executive NNCLI mode.
2 At the Privileged Executive prompt, enter copy tftp config
address filename .
--End--
Downloading a configuration file automatically using NNCLI
Procedure Steps
Step Action
1 At the command prompt, enter enable to access the Privileged
Executive NNCLI mode.
2 At the Privileged Executive prompt, enter configure network
load-on-boot {disable | use-bootp |use-config}
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.