Nortel Networks 2500 Series - Manual (Page 44)

44 User interface fundamentals
• Perform ping to verify the IP address or Telnet to the switch IP.
• If the switch is not Layer 3 enabled, ensure that the device can
access the management VLAN of the switch—either through a direct
connection to a port in the management VLAN or through Layer 3
devices between the device and the switch.
Opening a Web-based management session
Procedure Steps
Step Action
1 Open a new Web browser window.
2 In the Web browser address field, type the switch or stack IP
address.
3 Press Enter.
4 Enter the case-sensitive user name: RO for read-only access,
RW for read-write access.
5 If the system is password protected, enter the password.
--End--
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.