Nortel Networks 2500 Series - Manual (Page 60)

60 Configuration files fundamentals
4 In BinaryConfigFilename, enter the configuration file name.
5 In Action, click dnldConfig.
6 Click Apply.
--End--
Saving current configuration to flash memory manually
Procedure Steps
Step Action
1 From Device Manager main menu, choose Edit > File System.
2 Choose Save Configuration.
3 Deselect AutosaveToNvramEnabled—this option is enabled
by default.
4 In Action, choose copyConfigToNvram.
5 Click Apply.
--End--
ASCII configuration file job aid
The following table describes the fields on the Ascii Config File tab.
Field name Description
TftpServerInetAddressType Specifies the IP version of the TFTP server
address.
TftpServerInetAddress Specifies the TFTP server IP address.
AsciiConfigFilename Specifies the name of the ASCII configuration
file.
AsciiConfigAutoDownload
•
disabled—Disables automatic loading of
ASCII configuration file at startup.
•
useBootp—Specifies loading the ASCII
configuration file at startup and using BootP
to obtain values for the TFTP address and
file name.
•
useConfig—Specifies loading the ASCII
configuration file at startup and using the
locally configured values for the TFTP
address and file name.
AsciiConfigAutoDldStatus Displays the configuration automatic download
status.
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.