Nortel Networks 2500 Series - Manual (Page 31)

Device Manager concepts 31
3 Follow the directions on the Web page to find and install the
appropriate patch.
--End--
Installing from a Windows environment
Procedure Steps
Step Action
1 Locate the downloaded executable Device Manager file on the
local computer.
2 Double-click the executable file to start the installation process:
example jdm_xxx.exe (xxx represents the software version
number).
3 After the installation programs loads, read and follow the
instructions on the Introductory window and click Next.
4 Read and accept the license agreement, and then click Next.
5 Nortel recommends that you select the Typical installation
option on the Windows Choose Install Sets window but, if you
require a more specialized installation, select one of the other
options, and then click Next.
6 On the Windows Choose Install Folder window, type a local
file system location to install the application. You can also click
Choose to select a location, or click Restore Default Folder to
restore the default installation location. Click Next to proceed.
7 Select a location for the Start menu icon placement, and then
click Next.
8 Confirm your selections on the Pre-Installation Summary
window, and then click Install to begin installation.
9 If changes are required, click Previous to return to the
appropriate location.
10 After the installation process is complete, click Done.
--End--
Installing from a UNIX environment
Procedure Steps
Step Action
1 To install Device Manager in a UNIX environment, close all
programs. For more information about using SPARC version 5.8,
5.9, or 5.10, see
"Prerequisites for Device Manager installation "
(page 30) .
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.