Nortel Networks 2500 Series - Manual (Page 18)

18 User interface fundamentals
Opening an NNCLI session
Procedure Steps
Step Action
1 Connect to the switch.
2 Enter the password, if applicable.
3 At the NNCLI Banner Screen, press CTRL+Y .
4 To access NNCLI, from the main menu, press c or scroll to
Command Line Interface.
5 Press Enter.
--End--
Device Manager concepts
This section provides information to obtain, install, start, and use Device
Manager.
Navigation
• "Interface components" (page 18)
• "Online help" (page 28)
• "Device Manager procedures" (page 28)
Device Manager is a graphical user interface (GUI) application you can
use to configure and manage the switch. The application provides a
real time graphical representation of the switch front panel and provides
network access to monitor and configure devices.
Because Device Manager is a client application that resides on a
computer, you must install the application before you can use it.
You can download Device Manager from the Nortel Web site. The Java
Runtime Environment (JRE) is bundled with the Device Manager software
and does not require a separate installation.
Device Manager uses the Simple Network Management Protocol (SNMP)
to configure and manage devices.
Interface components
This section describes Device Manager interface components and their
use in the application.
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.