Nortel Networks 2500 Series User Manual
Page 59
Device Manager configuration files
59
3
In TftpServerInetAddressType, select the TFTP server internet
address type.
4
In AsciiConfigFilename, enter the configuration file name.
5
In AsciiConfigAutoDownload, choose the automatic download
source—either useBootp, to specify loading the ASCII
configuration file at system start and using Bootp to obtain
values for the TFTP address and file name, or useConfig, to
specify loading the ASCII configuration file at system start and
using the locally configured values for the TFTP address and file
name.
6
Click Apply.
--End--
Storing a binary configuration file on a TFTP server
Procedure Steps
Step
Action
1
From the Device Manager main menu, choose Edit > File
System.
2
Select Config/Image/Diag file. For more information about the
fields on the Config/Image/Diag file tab, see
.
3
In TftpServerInetAddressType, select the address type.
4
In TftpServerInetAddress, enter the TFTP server IP address.
5
In BinaryConfigFilename, enter the configuration file name.
6
In Action, select upldConfig.
7
Click Apply.
--End--
Downloading a binary configuration file from a TFTP server
Procedure Steps
Step
Action
1
From the Device Manager main menu, choose Edit > File
System.
2
Select Config/Image/Diag file. For more information about the
fields on the Config/Image/Diag file tab, see
.
3
In TftpServerInetAddress, enter the TFTP server IP address.
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102
01.01
Standard
27 October 2008
Copyright © 2008 Nortel Networks
.