Nortel Networks 2500 Series - Manual (Page 70)

70 NNCLI quick reference
Connect to the switch
You can use the following options to connect to the switch:
•
remote
•
console
The following table lists the access method for three types of switch
connection.
Secure Shell (SSH) enabled SSH not enabled Console access available
Remote access Telnet access Normal console connection
access
Start NNCLI configuration from the main menu
To start a configuration using NNCLI, choose Command Line Interface
from the main menu.
At the prompt, perform these commands.
Command Purpose
enable Enter configuration mode
config t Start configuration
NNCLI command modes
To perform certain functions, you must use the correct NNCLI command
mode.
The following list is a summary of NNCLI command modes:
Command modes
•
User Executive (exec mode)
•
Privileged Executive (privExec mode)
•
Global Configuration (config mode)
• Interface Configuration (config-if mode)
For more information, see "NNCLI concepts" (page 13) .
Restart the switch using the factory default configuration
Perform these commands to restart the switch using the factory default
configuration.
Command Purpose
exit Exit the configuration mode.
Nortel Ethernet Routing Switch 2500 Series
Fundamentals
NN47215-102 01.01 Standard
27 October 2008
Copyright © 2008 Nortel Networks
.