NEC Express5800 Series EXP320B - Manual (Page 351)

System Upgrade 8-39
Setup of Optional PCI Board
„ To enable the fault-tolerant feature of the optional device, the identical PCI boards must be
installed to the slots with the same number in CPU/IO module#0 and CPU/IO module#1.
„ The BIOS settings need to be modified when mounting some optional PCI boards. To change
the BIOS settings, start the BIOS Setup Utility to change the [Boot Monitoring] configuration in
[Server] – [Monitoring Configuration]. See “Monitoring Configuration” on page 4-25 for more
details.
„ For the supported connecting devices, contact your sales agent.
N8804-002 1000BASE-T 1ch board set
N8804-003 1000BASE-SX 1ch board set
N8804-004 1000BASE-T 2ch board set
IMPORTANT:
For LAN cable’s connector, use a RJ-45 connector which is compliant with IEC8877 standard. If
any other connector is used, it may not be removed easily.
„ List of slots to install optional PCI boards
Refer to “List of option PCI boards and installable slots:” on page 8-35.
„ Installation procedure
NEC Express5800/ft series sets dual configuration with optional PCI boards in pairs. See “Step 6:
Set Dual LAN Card Configuration.”
N8803-032 SCSI board
„ List of slots to install optional PCI boards
Refer to “List of option PCI boards and installable slots:” on page 8-35.
„ Driver installation procedure
The driver for N8803-032 SCSI board is included in the OS, so its installation is not necessary.