NEC Express5800 Series EXP320B - Manual (Page 179)

System Configuration 4-81
No. Error message Action
If you do not find any problem, contact your service
representative.
4
The KVM request was aborted.
This is not a problem. Click [OK] and close the
message box.
5
UDP packet transmission failed.
Check the network environment and server.
If you do not find any problem, contact your service
representative.
6 Remote KVM console can not
activate because it is disabled
Refer to page 4-63 and enable remote KVM console.
7 Remote KVM Console is used by
other client. Try again after the client using Remote KVM Console
finishes using.
8 Failed to shut down Remote KVM
Console. Use Remote KVM Console after waiting 3 or more
minutes.
9
Failed to make settings.
Check the network environment and try again.
Contact your service representative if the error
persists. .
10
The UDP connection is closed.
Check the network environment and server.
If you do not find any problem, contact your service
representative.
System event log (SEL) display errors
No. Error message Action
1
Failed to clear session event logs
of BMC.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
2
Failed to acquire system event
logs.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
Sensor data records (SDR) display error
No. Error message Action
1
Failed to acquire sensor data
records.
The network may be busy. Try again. If the error
persists, contact your service representative because a
failure may have occurred in BMC.
Field replaceable (FRU) information display error
No. Error message Action
1
Failed to acquire field replaceable
units information.
The network may be busy. Try again. If the error
persists, contact your service representative because a
failure may have occurred in BMC.