NEC Express5800 Series EXP320B - Manual (Page 113)

System Configuration 4-15
SCSI Controller
When you select “SCSI Controller” in the Advanced menu, the following screen appears.
ᴾ ᴾ
Refer to the table below for information on options.
ᴾ
Option
Parameter Description
SCSI Controller
ᴾ [Enabled]
Disabled
ᴾ
If “Disabled” is selected, chip
stays in the reset status. In this
status, the SCSI Controller is
totally disabled and not
recognized by the PnP OS.
Option ROM Scan
ᴾ [Enabled]
Disabled
ᴾ
If “Enabled” is selected, the
extended ROM of the device
will be initialized.
ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ [ ]: Factory-set
ᴾ