NEC Express5800 Series EXP320B - Manual (Page 251)

Installing and Using Utilities 5-67
Procedure in the Server Maintenance Utility
1. On the main window of the Server Maintenance Utility, select the target component.
The screen of the target component appears.
2. Check the current status of the target CPU module with the LEDs.
3. Select a dump acquisition method on the CPU module screen, and select [Harvest].
A certain time is required for the dump acquisition. The dump is stored to the system
defined location on the server.
The result of the dump acquisition can be registered in the syslog.
4. Start the component.
Sample screen of Server Maintenance Utility
Main window [CPU Module] screen