NEC Express5800 Series EXP320B User Manual
Page 237
Installing and Using Utilities 5-53
Procedure in the Server Maintenance Utility
Start
1.
Select the target component from the main window of the Server Maintenance Utility.
The screen of the target component appears.
2.
Check the current state of the target component with the LEDs.
3.
Select [Up] of the target component.
A certain time is required for the start.
The start result can be confirmed by the LEDs on the target component. The result of the
start operation is registered in the syslog.
Stop
Stop before replacing components.
1.
Select the target component from the main window of the Server Maintenance Utility.
The screen of the target component appears.
2.
Check the current state of the target component with the LEDs.
3.
Select [Down] of the target component.
A certain time is required for the start.
The start result can be confirmed by the LEDs on the target component. The result of the
start operation is registered in the syslog.
Sample screen of Server Maintenance Utility
Main window
[CPU Module] screen