NEC Express5800 Series EXP320B - Manual (Page 148)

4-50 System Configuration
TIPS:
To disable the remote management console function, make the following settings from the
NEC EXPRESSBUILDER CD-ROM. Load the NEC EXPRESSBUILDER CD-ROM on
the server, and from the main menu, select [Tools]
ĺ [System Management] ĺ [Set FT
Remote Management Card (LAN1/LAN2)]. Select [Disable] on [Remote Management
Console] and register the setting. The host name, the domain name, and the IP address
cannot be modified on this screen.
The image below shows the setting screen for LAN1 (CPU/IO module #0).
If you use remote management for the first time, the “Waning - Security” dialogue box as shown
below may be displayed. Check the message, and then click [Yes] [No], or [Always]. Then you will
see the logon page. If you are not sure, click [No].