NXP Semiconductors PCA9665 - Manual (Page 69)

PCA9665_2 © NXP B.V. 2006. All rights reserved.
Product data sheet Rev. 02 — 7 December 2006 69 of 91
NXP Semiconductors
PCA9665
Fm+ parallel bus to I 2 C-bus controller
11. Limiting values
[1] 5.5 V steady state voltage tolerance on inputs and outputs is valid only when the supply voltage is present. 4.6 V steady state voltage
tolerance on inputs and outputs when no supply voltage is present.
Table 47. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
V DD supply voltage − 0.3 +4.6 V
V
I
input voltage any input [1] − 0.8 +6.0 V
I
I
input current any input − 10 +10 mA
I
O
output current any output − 10 +10 mA
P
tot
total power dissipation - 300 mW
P/out power dissipation per output - 50 mW
T
stg
storage temperature − 65 +150 ° C
T
amb
ambient temperature operating − 40 +85 ° C