Psion Teklogix ISO 9001 - Manual (Page 56)

Chapter 3: Getting To Know The WORKABOUT PRO
Switching The Hand-Held On And Off
38 WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
3.3 Switching The Hand-Held On And Off
Switching On The WORKABOUT PRO
• Press and hold down the [ENTER] key for at least two seconds.
• When the LED flashes green, release the [ENTER] button.
The startup Today screen is displayed.
Note: If the WORKABOUT PRO is in suspend state, pressing [ENTER] ‘wakes’
the unit from this state. The screen in which you were working before the
computer entered suspend state is displayed. “Wakeup Keys Tab” on
page 126 describes how you can assign other ‘wakeup’ keys or enable a
two-key ‘power on’ sequence.
Switching Off The WORKABOUT PRO (Suspend)
Important: Keep in mind that turning off the WORKABOUT PRO does not
result in a complete reboot; rather, the unit enters a power-saving,
“suspend” state. When the unit is turned on from suspend state,
operation resumes within a few seconds.
To switch off the WORKABOUT PRO:
• Press the [FN/BLUE] key, and then press the [ENTER] key.
3.4 The Keyboards
3.4.1 The WORKABOUT PRO Keyboard
The WORKABOUT PRO is available in two models, each with it’s own keyboard
layout. The WORKABOUT PRO C model is equipped with a 52-key, alphanumeric
keyboard. The WORKABOUT PRO S model is equipped with a 25-key numeric
keyboard.
Most of the keys on these keyboards operate much like a desktop computer. Where a
key or key function is not consistent with the PC keyboard, the differences are
noted.
The [FN/BLUE] and [FN/ORANGE] modifier keys provide access to additional
keys and system functions. These functions are colour coded in orange and blue
print above the keyboard keys.