Psion Teklogix ISO 9001 - Manual (Page 301)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 283
Chapter 7: Peripheral Devices & Accessories
Quad Docking Station–WA4204-G2 & WA4304-G2
• Try inserting a battery that you know to be working in the charger well.
• Reconnect the mains power cable, and check that the charger well indicator
flashes at power up.
7.10 Quad Docking Station–WA4204-G2 & WA4304-G2
Figure 7.7 Quad Docking Station
Note: WA4204-G2 is designed for WORKABOUT PRO C models; WA4304-G2
is designed for WORKABOUT PRO S models.
The quad docking station is shipped with a docking manual. It is critical
that this manual be reviewed for additional information and updates.
The quad docking station permits each of four docked WORKABOUT PROs to
communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also
provides sufficient power to operate and fast charge the batteries in the units.
7.10.1 Quad Docking Station Setup
After unpacking the unit:
• Visually inspect the unit for any damage.
• Install the IEC power cord and apply power.
A green indicator in the lower-right corner of the front panel lights up to indicate
that power is present.