Psion Teklogix ISO 9001 - Manual (Page 172)

Chapter 5: Settings
Decoded (HHP)
154 WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded
bar code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code.
Enabling these parameters defines the length of the addendum bar code to either
2 or 5 characters.
Addendum Required
When this parameter is set to on , the scanner does not accept the main bar code
without an addendum.
Addendum Separator
“Addendum Separator” is a space that is added between the UPC E bar code and the
Add-on code/Addenda. When this parameter is set to on
, the scanner does not accept
the main bar code without an addendum.
Prefix/Suffix
Refer to page 138 for details.
5.27.2.10 UPC/EAN Shared Settings
Extended Coupon Code
This parameter specifies whether or not the imager will read only UPC-A/EAN-13
bar codes that have addenda.
Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired
behavior.