Psion Teklogix ISO 9001 - Manual (Page 285)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 267
Chapter 7: Peripheral Devices & Accessories
Carrying Accessories
7.1 Carrying Accessories
There are a variety of carrying accessories to help the operator work safely and
comfortably with the WORKABOUT PRO.
Table 7.1 Carrying Accessories
Important: Do not use adhesives such as Loctite to secure screws on carrying
accessories. These chemicals may damage the plastic casing.
7.1.1 Attaching The Hand Strap
The hand strap can be attached to the back of the WORKABOUT PRO to provide a
secure means for operators to carry the hand-held.
The hand strap is attached to the back of unit using two Phillips head screws
provided with this accessory.
Carrying Accessory Model Number
Hand Strap
WA6025 for WORKABOUT PRO C
WA6125 for WORKABOUT PRO S
Pistol Grip WA6001-G1
Protective Carrying Case for
WORKABOUT PRO C
(Model # varies depending on the
end-cap installed on hand-held)
WA6090-G2 (with a belt clip – works with scanners)
WA6094-G2 with GSM or 802.11b/g end cap
WA6095-G2 with 1D Scan or 1D Imager end cap
WA6096-G2 with 2D scan or 1D imager end cap
WA6097-G2 with universal end cap (case’s top open)
Protective Carrying Case for
WORKABOUT PRO S
(Model # varies depending on the type
end-cap installed on hand-held)
WA6190-G2 (with a belt clip – works with scanners)
WA6194-G2 with GSM or b/g end cap
WA6195-G2 with 1D Scan or 1D Imager end cap
WA6196-G2 with 2D scan or 1D imager end cap
WA6197-G2 with universal end cap (case’s top open)
Soft Shell Holster WA6050