Psion Teklogix ISO 9001 - Manual (Page 203)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 185
Chapter 5: Settings
Imager
5.27.4 Imager
• Tap on the Scanner dropdown menu, and choose Imager.
5.27.4.1 Options–Imager
TekImager Enabled
Setting this option to on enables the imager installed in your hand-held.
Continuous Scan Mode
Setting this parameter to on keeps image capture active and continuously decoding
as long as the scanner button is pressed and held down.
Center Bar Code Only
Note: This parameter must be disabled when reading Composite bar codes.
When more than one bar code is visible in a single snap shot, this parameter allows
you to specify that only the centre image within the imager framing marker be read.
When this parameter is set to on, the target dot is pointed at the centre image and
only that image is returned.
Max Number Barcodes
This parameter specifies the maximum number of bar codes the imager will attempt
to decode in an image. A maximum of 6 bar codes can be decoded at one time.