Psion Teklogix ISO 9001 - Manual (Page 55)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 37
Chapter 3: Getting To Know The WORKABOUT PRO
Chargers And Docking Stations
IF YOU ARE POWERING UP A NEW UNIT, a warning message
may appear on the screen indicating that the backup battery
capacity is low. To recharge the backup battery, you must fully
charge the WORKABOUT PRO with the main battery installed in
the unit.
3.2.4.1 Chargers And Docking Stations
Important: FOR DETAILED INFORMATION about chargers and docking
stations, refer to Chapter 7: Peripheral Devices & Accessories
beginning on page 265.
Lithium Ion battery packs must be charged before use. These batteries can be
charged with a variety of chargers and docking stations. These include:
• AC wall adaptor (Model # PS1050-G1) – operates as an AC power source
and when plugged in, also charges the battery installed in the unit.
• Desktop Docking Station (Model # WA4003-G2) – operates as both a
charger and a docking station. Operating as a charger, both the battery
installed in the hand-held and a spare battery can be charged simulta-
neously.
• Quad Docking Station – (Model # WA4204-G2 for WORKABOUT PRO C
& Model # WA4304-G2 for WORKABOUT PRO S) can charge the battery
of up to four WORKABOUT PROs inserted in the docking station.
• Single Battery Charger (Model # WA3001-G1) – charges a single battery.
• Quad Battery Charger (Model # WA3004-G1) – charges up to four spare
High-Capacity or Super High-Capacity WORKABOUT PRO battery
packs.
It can take up to 4 hours to charge a battery. The WORKABOUT PRO intelligent
charging system protects the battery from over-charging by terminating the charge
process when the battery is at maximum capacity.
Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 46
for additional information about the battery.
Important: To avoid damaging the battery, chargers will not begin the charge
process until the battery temperature is between 0° C to 45 °C
(32° F to 113° F).