Palm Treo 755P - Manual (Page 299)

Section 7A: Help 291
He
lp
Replacing the Battery
Your Treo device comes with a replaceable battery. Be sure to use a battery that is approved
by Sprint and that is compatible with your device. Failure to use the proper battery may
result in personal injury or product damage, and it voids your device warranty.
1. Press Power/End to turn off the screen.
2. Press the Battery Door Release and slide the battery door downward to remove it
from your device.
3. Place a finger in the notch next to the battery and lift the battery up at a 45-degree
angle to remove it from the compartment.
4. Align the metal contacts on the new battery with the contacts inside the battery
compartment.
5. Insert the new battery into the compartment at a 45-degree angle, pressing it into
place. Slide the battery door onto the back of the device until it clicks into place.
6. Connect your device to the charger or sync cable.
7. Wait for your device to turn on, and then enable the network time or set the date and
time when prompted.
Note: Be sure to dispose of your old battery properly. In some areas, disposal in
household or business trash is prohibited.
Battery Door
Release
Notch
Battery
Contacts
Device
Contacts