Proxim ORiNOCO AP-2500 - Manual (Page 86)

86
Network Parameters
• Examples:
— If you set the Wired MAC Address to 00:03:8F:00:00:00 and you want to block all cards that begin with
00:03:8F, enter FF:FF:FF:00:00:00 as the Wired Mask. This will block any cards whose MAC address
begins with those digits, ranging from 00:03:8F:00:00:00 to 00:03:8F:FF:FF:FF.
— If you set the Wired MAC Address to a single MAC address (e.g., 00:03:8F:43:23:12), enter
FF:FF:FF:FF:FF:FF as the Wired Mask. The filter will block only the specified address.
— A Wired MAC Address of 00:03:8F:43:23:12 and a Wired Mask of FF:FF:FF:00:00:00 will also block any
cards whose MAC address begins with 00:03:8F, ranging from 00:03:8F:00:00:00 to 00:03:8F:FF:FF:FF.
To the filter, 00:03:8F:43:23:12 and 00:03:8F:00:00:00 are the same address; based on the specified
Wired Mask, only the value of the first six digits matter.
NOTE
For the purposes of this filter, the Wired Address refers to a packet’s source address. Therefore, all packets
whose source address equals the Wired MAC Filter will be blocked by the AP.
6. Enter 00:00:00:00:00:00 in the Wireless MAC field.
7. Enter 00:00:00:00:00:00 in the Wireless Mask field.
8. Click OK.
9. Configure additional filters, if necessary.
10. Click the back arrow button to return to the previous screen.
An entry is enabled automatically after you click OK. To edit an entry, click Edit. To disable or remove an entry, click
Edit and change the Status field from Enable to Disable or Delete.
Figure 4-14 Static MAC Configuration Screen