Miscellaneous parameters, Cli monitoring parameters, Miscellaneous parameters cli monitoring parameters – Proxim ORiNOCO AP-2500 User Manual
Page 231
231
Using the Command Line Interface
Miscellaneous Parameters
CLI Monitoring Parameters
Using the “show” command with the following table parameters will display operating statistics for the AP-2500 (these
are the same statistics that are described in
for the HTTP Web interface).
–
staticmp. Displays the ICMP Statistics.
–
statarptbl. Displays the IP ARP Table Statistics.
–
statbridgetbl. Displays the Learn Table.
–
statif. Displays information and statistics about the Ethernet and wireless interfaces.
–
stat802.11. Displays additional statistics for the wireless interfaces.
–
statethernet. Displays additional statistics for the Ethernet interface.
–
datSessionTable. Displays the Dynamic Address Translation (DAT) table.
Name
Type
Values
Access
CLI Parameter
Miscellaneous
Group
N/A
R
misc
Partner Image
Splash Screen
Integer
disable (0)
enable (1)
RW/Reboot
partnerImageOn
Partner Image
Filename
DisplayString
Size(1..32)
User Defined
RW/Reboot
partnerImageFileName
Maximum
Subscribers Allowed
Integer
N/A
R
maxNumSubscribers
Enable PPTP
Integer
disable (0)
enable (1)
RW/Reboot
pptpOn
PPTP Session Idle
Timeout
Integer
User Defined
RW/Reboot
pptpIdleTimeout
Enable IPSec
Integer
disable (0)
enable (1)
RW/Reboot
ipsecOn