Proxim ORiNOCO AP-2500 - Manual (Page 209)

209
Using the Command Line Interface
VLAN Parameters
VLAN ID Table
Interface Parameters
Since the AP-2500 devices support two PC Card slots, we differentiate the two wireless interfaces by using the table
index:
— Slot A = index 3
— Slot B = index 4
The wireless interface group parameter is wif, which displays the objects associated with both PC Cards A and B.
Wireless 802.11b Parameters
Name Type Values Access CLI Parameter
VLAN Group N/A R vlan
Status Integer enable
disable (default) RW vlanstatus
Name Type Values Access CLI Parameter
VLAN ID Table Table N/A R vlanidtbl
Index Integer32 1 (Wireless A)
2 (Wireless B) R index
Identifier (ID) VlanId 0 (disable) or 1 – 4094 RW id
Name Type Values Access CLI Parameter
Wireless Interfaces Group N/A R wif
Network Name DisplayString 1 – 31 characters
My Wireless Network A
(default)
My Wireless Network B
(default) RW netname
Distance between APs Integer large (default)
medium
small
minicell
microcell RW distaps
Auto Channel Select (ACS) Integer enable (default)
disable RW autochannel
Interference Robustness Integer enable (default)
disable RW interrobust
DTIM Period Integer 1 – 65535
1 = default RW dtimperiod
Operating Frequency Channel Integer 1 - 11 (FCC) (3 = default)
1 - 13 (ETSI) (3 = default)
1 - 14 (JP) (3 = default)
10 - 13 (FR)
(10 = default) RW channel
RTS/CTS Medium Reservation Integer 0 – 2347
Default is 2347 (off) RW medres
Multicast Rate Integer 1 Mbit/sec (1)
2 Mbit/sec (2) (default)
5.5 Mbit/sec (3)
11 Mbit/sec (4) RW multrate
Closed Wireless System Integer enable
disable (default) RW closedsys
Load Balancing Integer enable (default)
disable RW ldbalance