Proxim ORiNOCO AP-2500 - Manual (Page 194)

194
Using the Command Line Interface
NOTE
Some tables use a different syntax. See Working with Tables for details.
Example 4 - Enable, Disable, or Delete a table entry or row
In this example you would like to manage the second table row/entry.
Syntax:
[Device Name]>set index status
[Device Name]>set
Example:
[Device Name]>set mgmtipaccesstbl 2 status enable
[Device Name]>set mgmtipaccesstbl 2 status disable
[Device Name]>set mgmtipaccesstbl 2 status delete
[Device Name]>set mgmtipaccesstbl 2 status 2
NOTE
You may need to enable a disabled table entry before you can change the entry’s elements. Also, some tables
use a different syntax. See
Working with Tables for details.
Example 5 - Show the Group Parameters
In this example you can view all elements of a group or table.
Syntax:
[Device Name]>
show
Example:
[Device Name]>show network
Result: The CLI displays network group parameters. Note that show network and show ip work the same.
Figure A-9 Results of “show network” and “show ip” CLI Commands